HOME > Application > GiGA CHANNEL

Application

ABALOG DEVICE XILINX

Application : GiGA CHANNEL

28Gbps High-speed Optical Communication Board APX-7142

APX-7142 is a optical communication board which enables shearing data at high-speed among two or more systems by using an optical link cable. Hardware supports all protocol processing which required for communication, It realize easy system construction and low load software performance.


GiGA CHANNEL
Zoom

■Features

・ PCI Express 2.0 Gen2(5.0GT/s)×8 lane
・ MAX 28Gbps High-speed data communication(14Gbps Dual Channel structure)
・ Equipped with 512MByte(256MByte 2Ch) Communication memory
・ Up to 300m extensibility of intermodal distance
・ Hardware protocol processing
・ Ensure reliability for communication data by Hardware CRC and Hardware retry
・ Predictable communication delay
・ Identify disconnection by LED and software
・ Memory transfer with built-in DMA controller without passing through the CPU
・ Built-in doorbell function to interrupt request for other modules
・ Node ID,master-slave are on register settingsv



GiGA CHANNEL

■Specification

Model APX-7142
Host I/F PCI Express 2.0 Gen2(5.0GT/s)×8 lane
Base Specification2.0
Communication Format Optical fiber
Transfer rate: 14.025Gbps x2ch
Transfer mode: Multi Mode
Internodal distance(MAX): 100m *1
Laser format : 850nm VCSEL
Laser safety standards: Class 1
Communication Connector &Cable Fiber diameter: 50μm
Connector format: LC connector
Communication Protocol Original Protocol
Transfer Rate
(Design value)
2GByte/s(MAX)
Data Transfer Delay 1.5μs/Node (Receiving → Transmitting)
Except cable delay
Connection Capacity 32 nodes(MAX)
Communication Controller (with FPGA) AVAL DATA original Protocol
Memory 512MByte (256MByte 2ch)
Dimension 210.0mm×111.15mm (non-projection)
Power Requirements +12V
Environment *2 Operating temperature: 0℃ to 50℃
Humidity: 35% ~ 80% (non-condensing)
OS Windows/VxWorks/Linux

* 1:Intermodal distance differ depending on fiber diameter of optical cable(50μm/62.5μm)
* 2: Storage environment
       Temperature: -20℃ to 70℃, Humidity: 35% to 80% (non-condensing)

■Front Panel

Front Panel

■Connectable Products

APX-7142 can be connected to one another.
Please contact us if you are considering of connection to other platform.
Contact us

17Gbps High-speed Optical Communication Board APX-782

GiGA CHANNEL provides large-capacity-data communication between equipment.
It connects in loop the shared memory on the GiGA CHANNEL products which equipped with each nodes using the optical fiber cable, then it enables transfer the frame sequentially with communication data and high-speed data transfer across it.

It can predict the effective transfer rate without occur the collisions.
Since it supports entire protocol processing completely in hardware which required for communication, the software performance is reduced.


APX-782
Zoom

■Features

・ High noise immunity optical fiber connection between boards
・ PCI-Express 2.0 Gen2(5.0Gbps)×4 lane
・ Up to 17Gbps high-speed data communication
・ 512MByte shared memory
・ Up to 64 boards connectivity
・ Up to 150m extensibility of intermodal distance *1
・ Supports entire protocol processing completely in hardware
・ Ensure reliability for communication data by Hardware CRC check function and Hardware retry function
・ Predictable communication delay
・ Identify disconnected area of cable by LED or software
・ Memory transfer with built-in DMA controller without passing through the CPU
・ Built-in doorbell function to interrupt request for other modules
・ 2KByte share register for low-capacity data transfer or status transfer
・ All of the control is done by single-chip FPGA
・ Simple data sharing between different OS or different forms of system
・ Provided Windows/Linux driver
*1 Maximum extensibility may differ from cable specification


■Specification

Model APX-782
Host I/F PCI Express 2.0×4(5.0GT/s)
Communication Format Optical fiber: 8.5Gbps×2ch
Transfer rate: 17Gbps
Transfer mode: Multi Mode
Internodal distance(MAX): 150m *1
Laser format: 850nm VCSEL
Laser safety standards: Class 1
Communication Connector &Cable Fiber diameter: 50μm
Connector format: LC connector
Communication Protocol Original protocol
Transfer Rate
(Theoretical value)
1.7GByte/s (writing)
Data Transfer Delay 250ns/Node (Receiving → Transmitting )
Except cable delay
Connection Capabilities 64node(MAX)
Communication Controller (with FPGA) AVAL DATA original protocol
Memory 512 Mbyte
Dimensions 167.65mm×111.15mm
Power Requirements +12V: 1.3A
Environment *2 Operating temperature: 0℃to 50℃
Humidity: 35% to 80%(non-condensing)
Environmental Consideration RoHS
OS Windows/Linux

* 1: Maximum intermodal distance differ according to the optical cable
* 2: Storage environment
       Temperature: -20℃ to 70℃, Humidity 35% to 80% (non-condensing)

■Connectable Products

APX-782 can be connected with following product.
It can easily share memory between products which in different plat forms or different systems.

On-board card product: AGM-782

17Gbps High-speed Optical Communication Board AGM-782A

AGM-782A is a card type GiGACHANNEL module which enables 17Gbps high-speed serial communication of the data within your equipment.

It can be easily mounted by optical cable connection between AGM-782A and the connection of memory-like interface with equipment.
Since it supports entire protocol processing completely in hardware which required for communication, no special processing is necessary.


AGM-782A
Zoom

■Features

・ Up to 64 of optical cable connectivity between boards
・ Simple protocol
・ Easy data sharing between different OS or different systems
・ Up to 17Gbps high-speed data communication
・ Supports communication function completely in hardware
・ Supports interrupt of arbitrary internode communication

■Embed 17Gbps Transfer Function Into Your Equipment

AGM-782A enables easily embed 17Gbps transfer tunction on your original-board

■Specification

Model AGM-782A
Host I/F AVALDATA Original bus(LVDS)
Communication Format Optical fiber: 8.5Gbps×2ch
Transfer rate: 17Gbps
Transfer mode: Multi Mode
Internodal distance(MAX): 150m *1
Laser format: 850nm VCSEL
Laser safety standards: Class 1
Communication Connector &Cable Fiber diameter: 50μm
Connector format: LC connector
Communication Protocol Original protocol
Transfer Rate
(Theoretical value)
1700MByte/s(MAX)connecting with AGM-782 P to P
Data Transfer Delay 250ns/Node (Receiving → Transmitting )
Except cable delay
Connection Capabilities 64node(MAX)
Communication Controller (with FPGA) AVAL DATA original protocol
Memory
Main Functions Doorbell function, shared register communication,
status LED:ACT/LNK/ERR, receiving filter
Dimensions 115.00mm×85.00mm
Power Requirements +3.3V:2.0 A(MAX)(except inrush current or ripple current)
Environment *2 Operating temperature: 0℃to 50℃
Humidity: 35% to 80%(non-condensing)
OS

* 1: Maximum intermodal distance differ according to the optical cable to be used
* 2: Storage environment
       Temperature: -20℃ to 70℃, Humidity 35% to 80% (non-condensing)

■Connectable Products

ProductsAGM-782A can be connected with following product.
It can easily share memory between products which in different plat forms or different systems.

PCI Express bus Product: APX-782

Connection List Of GiGA CHANNEL →

8.5Gbps High-speed Optical Communication Board APX-781

GiGA CHANNEL provides large-capacity-data communication between equipment.
It connects in loop the shared memory on the GiGA CHANNEL products which equipped with each nodes using the optical fiber cable, then it enables transfer the frame sequentially with communication data and high-speed data transfer across it.

It can predict the effective transfer rate without occur the collisions.
Since it supports entire protocol processing completely in hardware which required for communication, the software performance is reduced.


APX-781
Zoom

■Features

・ High noise immunity optical fiber connection between boards
・ PCI-Express 2.0 Gen2(5.0Gbps)×4 lane
・ Up to 8.5Gbps high-speed data communication
・ 512MByte shared memory
・ Up to 64 boards connectivity
・ Up to 150m extensibility of intermodal distance *1
・ Supports entire protocol processing completely in hardware
・ Ensure reliability for communication data by Hardware CRC check function and Hardware retry function
・ Predictable communication delay
・ Identify disconnected area of cable by LED or software
・ Memory transfer with built-in DMA controller without passing through the CPU
・ Built-in doorbell function to interrupt request for other modules
・ 2KByte share register for low-capacity data transfer or status transfer
・ All of the control is done by single-chip FPGA
・ Simple data sharing between different OS or different forms of system
・ Provided Windows/Linux driver


*1 Maximum extensibility may differ from cable specification

■Specification

Model APX-781
Host I/F PCI Express 2.0×4(5.0GT/s)
Communication Format Optical fiber: 8.5Gbps×1ch
Transfer rate: 8.5Gbps
Transfer mode: Multi Mode
Internodal distance(MAX): 150m *1
Laser format: 850nm VCSEL
Laser safety standards: Class 1
Communication Connector &Cable Fiber diameter: 50μm
Connector format: LC connector
Communication Protocol Original protocol
Transfer Rate
(Theoretical value)
850MByte/s(writing)
Data Transfer Delay 450ns/Node (Receiving → Transmitting )
Except cable delay
Connection Capabilities 64node(MAX)
Communication Controller (with FPGA) AVAL DATA original protocol
Memory 512 Mbyte
Dimensions 167.65mm×111.15mm
Power Requirements +12V: 1.2A
Environment *2 Operating temperature: 0℃to 50℃
Humidity: 35% to 80%(non-condensing)
Environmental Consideration RoHS
OS Windows/Linux

* 1: Maximum intermodal distance differ according to the optical cable to be used
* 2: Storage environment
       Temperature: -20℃ to 70℃, Humidity 35% to 80% (non-condensing)

■Connectable Products

APX-781 can be connected with following product.
It can easily share memory between products which in different plat forms or different systems.

On-board card product: AGM-781

8.5Gbps High-speed Optical Communication Board AGM-781A

AGM-781A is a card type GiGA CHANNEL module which enables 8.5Gbps high-speed serial communication of the data within your equipment.
It can be easily mounted by optical cable connection between AGM-781A and the connection of memory-like interface with equipment.
Since it supports entire protocol processing completely in hardware which required for communication, no special processing is necessary.


APX-781
Zoom

■Features

・ Up to 64 of optical cable connectivity between boards
・ Simple protocol
・ Easy data sharing between different OS or different systems
・ Up to 8.5Gbps high-speed data communication
・ Supports communication function completely in hardware
・ Supports interrupt of arbitrary internode communication


■Embed 8.5Gbps Transfer Function Into Your Equipment

AGM-781A enables easily embed 8.5Gbps transfer function on your original-board

■Specification

Model AGM-781A
Host I/F AVALDATA Original bus(LVDS)
Communication Format Optical fiber: 8.5Gbps×1ch
Transfer rate: 8.5Gbps
Transfer mode: Multi Mode
Internodal distance(MAX): 150m *1
Laser format: 850nm VCSEL
Laser safety standards: Class 1
Communication Connector &Cable Fiber diameter: 50μm
Connector format: LC connector
Communication Protocol Original protocol
Transfer Rate
(Theoretical value)
800MByte/s (MAX)connecting with AGM-781 P to P
Data Transfer Delay 450ns/Node (Receiving → Transmitting )
Except cable delay
Connection Capabilities 64node(MAX)
Communication Controller (with FPGA) AVAL DATA original protocol
Memory
Main Functions Doorbell function, shared register communication,
status LED:ACT/LNK/ERR, recieving filter
Dimensions 115.00mm×85.00mm
Power Requirements +3.3V:1.7A(MAX)(except inrush current or ripple current)
Environment *2 Operating temperature: 0℃to 50℃
Humidity: 35% to 80%(non-condensing)
OS

* 1: Maximum intermodal distance differ according to the optical cable to be used
* 2: Storage environment
       Temperature: -20℃ to 70℃, Humidity 35% to 80% (non-condensing)

■Connectable Products

AGM-781A can be connected with following product.
It can easily shared memory between products which in different plat forms or different systems.

PCI Express bus Product : APX-781

Connection List Of GiGA CHANNEL →

8Gbps High-speed Optical Communication Board APX-742B

GIGA CHANNEL series is embedded module that provides Giga-bit high-speed and reliable data transmission among various types of nodes in loop topology.

GIGA CHANNEL operates at a wide variety of speeds ( 8 Gbits/s) on optical media. The data transmission with hardware-intensive proprietary protocol and shared memory equipped in each GIGA CHANNEL module, realizes easy-to-use installation and wide range of applications. The data written in the shared memory of one GIGA CHANNEL module, is transferred to a loop network and is reflected to another shared memory of each GIGA CHANNEL modules on the loop network. GIGA CHANNEL enables various high-speed distributed processing applications, such as factory automation, multimedia, and medical visualization that the existing network interconnects are unable to run at the speeds needed.


APX-742B
Zoom

APX-742B

■Specification

Model APX-742B
Host I/F PCI Express 2.1 (2.5GT/s)×4
Communication Format Optical fiber/4.25Gbps ×2ch
Transfer rate: 8.5Gbps
Transfer mode: MultiMode
Laser format:850nm VCSEL
Laser safety standards: Class 1
Internodal distance(MAX): 150m *1
Communication Connector &Cable Fiber diameter: 50μm /62.5μm
Connector format: LC connector
Communication Protocol Original protocol
Transfer Rate
(Design value)
Theoretical value: 800MByte/s (MAX)
Data Transfer Delay 420ns(TYP),except Cable delay
Connection Capacity 64node(MAX)
Communication Controller (with FPGA) AVALDATAoriginalProtocol
Memory 128Mbyte
Dimension 167.65mm×111.15mm (non-projection)
Power Requirements +12V1.5A (MAX) (except inrush current or ripple current)
Environment *2 Operating temperature: 0℃to 50℃
Humidity: 35% to 85% (non-condencing)
OS Windows/VxWorks/Linux

* 1: Intermodal distance changes depending on fiber diameter of optical cable
       (50μm/62.5μm)
* 2: Storage environment
       Temperature: -20℃ to 70℃, Humidity 35% to 80% (non-condensing)

■Connectable Products

ProductsFor the details of the connection except between APX-742B-to-APX-742B
Contact us

p_apc742b

4Gbps High-speed Optical Communication Board AGM-741

AGM-741 is a card type GiGA CHANNEL module. which enables communication in your equipment with 4.25Gbps high-speed serial bus.
It allows easy implementable by connecting optical cable in AGM-741 to connecting equipment with memory-like interface.
Since communication protocol processing is performed on the hardware, no special processing is necessary.


APX-742B
Zoom

■Features

・ MAX 64unit connectivity
・ Optical cable connection between boards
・ Simple protocol
・ Easy data sharing amang different systems or different OS
・ 4.25Gbps communication rate
・ Hardware Communications
・ Supports interrupt of arbitrary internode communication


■Add 4Gbps Transfer function to your Unit

AGM-741 incorporates easily 4Gbps transfer function on your original board.

■Specification

Model AGM-741
Host I/F AVALDATA Original Bus(66MHz/64bit/2.5V)
Communication Format Optical fiver/4.25Gbps ×1ch
Transfer rate: 4.25Gbps
Transfer mode: Multi Mode
Internodal distance: 150m(MAX)*1
Laser format: 850nm VCSEL
Laser safety standards: Class 1
Communication Connector &Cable Fiber diameter: 50μm /62.5μm
Connector format: LC connector
Communication Protocol Original protocol
Transfer Rate
(Design value)
400MByte/s(MAX)AGM-741 P to P(in connection)
Data Transfer Delay About 450ns/Node (receive→transfer) (except cable delay )
Connectable Nodes 64node(MAX)
Communication Controller (with FPGA) AVAL DATA originalprotocol
Dimension 90mm×55.88mm (non-projection)
Power Requirements +3.3V : 2A (MAX)(except inrush current or ripple current)
Environment *2 Temperature: 0℃to 50℃
Humidity: 35% to 80%(non-condensing)
OS

* 1: Internodaldistance changes depending on fiber diameter of optical cable
       (50μm/62.5μm)
* 2: Storage environment
       Temperature: -20℃ to 70℃, Humidity 35% to 80% (non-condensing)

■Connectable Products

APX-721 can be connected to following products.
It enables share memory among two or more different platform products or different systems easily.

PCI Express bus:APX-741
XMC:AXM-741
PMC:APM-74

4Gbps High-speed Optical Communication Board APX-941LP4

GIGA CHANNEL series is embedded module that provides Giga-bit high-speed and reliable data transmission among various types of nodes in loop topology.
GIGA CHANNEL operates at a wide variety of speeds ( 8 Gbits/s) on optical media. The data transmission with hardware-intensive proprietary protocol and shared memory equipped in each GIGA CHANNEL module, realizes easy-to-use installation and wide range of applications. The data written in the shared memory of one GIGA CHANNEL module, is transferred to a loop network and is reflected to another shared memory of each GIGA CHANNEL modules on the loop network. GIGA CHANNEL enables various high-speed distributed processing applications, such as factory automation, multimedia, and medical visualization that the existing network interconnects are unable to run at the speeds needed.


APX-742B
Zoom

APX-742B

■Specification

Model APX-941LP4
Host I/F PCI Express 2.0 Gen2(5.0GT/s)×8
Communication Format Optical fiber/4.25Gbps ×1ch
Transfer rate: 8.5Gbps
Transfer mode: MultiMode
Laser format:850nm VCSEL
Laser safety standards: Class 1
Internodal distance(MAX): 150m*1
Communication Connector &Cable Fiber diameter: 50μm /62.5μm
Connector format: LC connector
Communication Protocol Original protocol
Transfer Rate
Design value)
Theoretical value: 800MByte/s (MAX)
Data Transfer Delay 420ns(TYP),except Cable delay
Connection Capacity 64node(MAX)
Communication Controller (with FPGA) AVALDATAoriginalProtocol
Memory 128Mbyte
Dimension 167.65mm×111.15mm (non-projection)
Power Requirements +12V1.8A (MAX) (except inrush current or ripple current)
Environment *2 Temperature: 0℃to 50℃
Humidity: 35% to 85% (non-condencing)
OS Windows/VxWorks/Linux

* 1: Intermodal distance changes depending on fiber diameter of optical cable
       (50μm/62.5μm)
* 2: Storage environment
       Temperature: -20℃ to 70℃, Humidity 35% to 80% (non-condensing)

■Front Panel

Front Panel

■Connectable Products

ProductsAPX-7142 can be connected to one another.
Please contact us if you are considering of connection to other platform.
Contact us

4Gbps High-speed Optical Communication Board APX-741B

GIGA CHANNEL series is embedded module that provides Giga-bit high-speed and reliable data transmission among various types of nodes in loop topology.
GIGA CHANNEL operates at a wide variety of speeds ( 8 Gbits/s) on optical media. The data transmission with hardware-intensive proprietary protocol and shared memory equipped in each GIGA CHANNEL module, realizes easy-to-use installation and wide range of applications. The data written in the shared memory of one GIGA CHANNEL module, is transferred to a loop network and is reflected to another shared memory of each GIGA CHANNEL modules on the loop network. GIGA CHANNEL enables various high-speed distributed processing applications, such as factory automation, multimedia, and medical visualization that the existing network interconnects are unable to run at the speeds needed.


APX-742B
Zoom

APX-742B

■Specification

Model APX-741B
Host I/F PCI Express 2.1 (2.5GT/s)×4
Communication Format Optical fiber/4.25Gbps ×1ch
Transfer rate: 4.25Gbps
Transfer mode: MultiMode
Laser format:850nm VCSEL
Laser safety standards: Class 1
Internodal distance(MAX): 150m*1
Communication Connector &Cable Fiber diameter: 50μm /62.5μm
Connector format: LC connector
Communication Protocol Original protocol
Transfer Rate
(Design value)
Theoretical value: 400MByte/s (MAX)
Data Transfer Delay 450ns(TYP),except Cable delay
Connection Capacity 64node(MAX)
Communication Controller (with FPGA) AVALDATAoriginalProtocol
Memory 128Mbyte
Dimension 167.65mm×111.15mm (non-projection)
Power Requirements +12V1.3A (MAX) (except inrush current or ripple current)
Environment *2 Temperature: 0・Eto 50・E
Humidity: 35% to 85% (non-condencing)
OS Windows/VxWorks/Linux

* 1: Intermodal distance changes depending on fiber diameter of optical cable
       (50μm/62.5μm)
* 2: Storage environment
       Temperature: -20℃ to 70℃, Humidity 35% to 80% (non-condensing)

■Front Panel

Front Panel

■Connectable Products

For the details of the connection except between APX-741B-to-APX-741B
Please contact us
Contact us

Top of page