HOME > Application > Express Converter > High-speed A/D Converter

Application

ABALOG DEVICE XILINX

Express Converter: High-speed A/D Converter

High-speed A/D Converter Board APX-5360

High-speed A/D conversion board with resolution 12 bit, 1.8 Gsps sampling single-end input 2 ch and capable of recording high-speed signals with high definition.
With various trigger modes, you can acquire necessary data and process data with FPGA. This FPGA realizes digital signal processing function.
Various signal processing functions etc. can be provided and only necessary data can be acquired. With built-in DMA controller, memory transfer is possible without CPU intervention.


GiGA CHANNEL
Zoom

■Features

・ PCI Express 2.0 (Gen 2) x 8 enables high-speed data transfer
・ DDR3 memory equipped, up to 4 G point size data transferable
・ External trigger input · External clock input for each 1 CH
・ A maximum of 1.8 Gsps possible AD
・ ± 0.5 V Single Ended Input 2 CH
・ OFFSET adjustment function
・ 4 CH LVTTL level D-IO function (5 V tolerant)
・ A-O function of 2 CH
・ RoHS compliant

■Specification

APX-5360
Analog I / F

Input




Single end 2 ch(during interleaving: single end 1 ch)


Input impedance 50 Ω
Coupling DC coupling
Input range ±0.5 V
resolution 12 bit
Sampling rate Maximum 1.8 Gsps (ns) / Interleave: 3.6 Gsps (ns)
frequency band 900 MHz -3 dB
Input maximum rating ±2 V (when energized) ±1.5 V (when energized)

Analog performance

SFDR: 68.0 dB @ 1800 MSPS, Fin 1 MHz
SNR: 56.3 dB @ 1800 MSps, Fin 1 MHz
ENOB: 9.0 bit @ 1800 MSPS, Fin 1 MHz
External clock input Number of channels: 1
Signal level: 0.4Vp-p to 1.5Vp-p (sine wave / square wave)
Frequency: 5 MHz to 100 MHz (when PLL is used)
150 MHz to 1800 MHz (at the time of direct sampling)
Input impedance: 1 MΩ / 50 Ω (AC coupling)
Connector shape: SMA
External trigger input Number of channels: 1
Signal level: LVTTL
Input impedance: 1 KΩ / 50 Ω
Connector shape: SMA
General purpose port: DIO Number of channels: DI 4ch DO 4ch
Signal level: LVTTL
Connector Model name: HDR -EC 26 LFDT 1 -SLD +
Analog output Signal level: LVTTL
Connector Model name: HDR -EC 26 LFDT 1 -SLD +
Connector shape: SMA
Number of channels: DI 4ch DO 4ch
Trigger External trigger / analog trigger / soft trigger
Analog trigger: Edge pulse
Trigger position: pre / post delay
Maximum number of samples 2 G words / 2 ch, 4 G words / 1 ch
memory DDR3-SDRAM (8 GB)
System bus PCI - Express 2.0 (Gen 2) 5.0 GT / s × 8
Power supply + 12 V ± 8%, +12 V / 3.4 A (40.8 W)
Operating environment Temperature 0 to 50 ℃, humidity 35% to 85% (no condensation)
FPGA 5 GXMA 3 K 1 F 40 I 2 N (manufactured by ALTERA)
External dimensions (not including protrusions) 212.65 mm × 111.15 mm, panel width 20 mm
Supported OS Windows 7/8, Linux correspond to 32 bit / 64 bit
Environmental response RoHS

■Front Panel

Front Panel

High-speed A/D Converter Board APX-5200A

12bit / 1GSps, 2-channel High-speed simultaneous sampling A/D Converter board


GiGA CHANNEL
Zoom

■Features

・12bit/1GSps sampling high-speed ADC
・± 0.5V single-ended input:2ch
・2-channel simultaneous sampling
・2GSps, 12bit, 1-channel high-speed sampling in interleaved mode
・External trigger input / External clock input:1ch
・2-channel analog output function(output arbitrary points by using PC memory)
・General purpose DI, DO :4ch each
・Equipped with EDDR3-SDRAM(8GByte)as a FIFO Memory
・Memory transfer using built-in DMA controller without CPU
・FPGA Up Date function
・PCI Express 2.0(Gen2) 5.0GT/s x8
・RoHS compliant

■Specification

Model APX-5200
Input Channel Single-ended 2ch (Interleaved mode:Single-ended 1ch)
Sampling Rate 1GSps (Interleaved mode: 2GSps)
Resolution 12bit
Sampling Time 1ns(min) (Interleaved mode: 0.5ns(min))
Number of Samples 2G word/2ch, 4G word/1ch
Input Range ±500 m V
Input Impedance 50 Ω
Trigger External trigger/ Analog trigger/ Software trigger
Memory DDR3-SDRAM(8Gbyte)
FPGA 5SGXMA3K1F40C2N(ALTERA)
Trigger type:
Internal trigger (Analog trigger)
External trigger
Software trigger
Analog trigger:
Edge / Pulse
Trigger position:
Pre / Post / Delay
General-purpose AO Number of output : 2ch
Resolution : 16bit
Output range : -4V to +4V
Input Interface SMA connector
System Bus PCI Express2.0 (Gen2) 5.0GT/s x8
Power Requirements +12V ± 9%, +3.3V ± 8%
Environment Operating temperature: 0℃ to 50℃
Humidity: 35% to 80%(non-condensing)
Dimensions 212.5mm x 111.15mm, Panel width 20mm (without projection)
OS Windows7/8 (32bit/64bit)
Environmental Consideration RoHS

■Front Panel

Front Panel

High-speed A/D Converter Board APX-5040

High-speed A/D converter board with resolution of 14 bits, high-speed sampling capable of high-speed sampling of 400 MHz, 2 high-speed signals can be recorded.
With various trigger modes, you can acquire necessary data and process data with FPGA.
In this FPGA, customization is also possible according to the use of the user.
With built-in DMA controller, memory transfer is possible without CPU intervention, and by supporting PCI Express 2.0 (Gen 2) 5.0 GT / s x 8, it maximizes the performance of analog input bandwidth.

GiGA CHANNEL
Zoom

■Features

・Using high speed ADC with 14 bit / 400 MHz sampling
・± 2 V / ± 1 V / ± 0.5 V single-ended input to 2 ch
・External trigger input ? External clock input for each 1 channel
・Supports variable frequency input
・General purpose DI/DO for each 4 ch
・General purpose AO 2 ch
・DDR3-SDRAM (2 Gbyte) is installed as FIFO Memory
・Memory transfer is possible without using a CPU with a built-in DMA controller
・Equipped with Up Data function of FPGA data
・PCI Express 2.0 (Gen 2) 5.0 GT/s x 8 compatible

■Specification

Model APX-5040
Input channel Single end 2ch
Sampling clock 400 MHz
Resolution 14bit
Sampling time 2.5 ns (min)
Sampling count 256 M words / 1 channel
Input range ± 2 V, ± 1 V, ± 500 mV
Input impedance 50 Ω
Trigger External trigger / Analog trigger / Soft trigger / DI trigger (Various trigger modes supported by FPGA)
Memory DDR3 - SDRAM (2 GB)
FPGA LSI: EP4SGX180HF35C2N (manufactured by ALTERA)
Trigger type: Internal trigger (analog trigger), external trigger, soft trigger, DI trigger
Analog trigger: Edge level pulse
Trigger position: pre / post delay
User logic: Free space can be customized
DA Circuit Number of output: 2 ch
Resolution: 16 bits
Output range: -4 V to +4 V
System bus PCI - Express 2.0 (Gen 2) 5.0 GT/s x 8
Power supply + 12 V ± 9%, + 3.3 V ± 8%
Operating environment Temperature 0 to 50 ℃, humidity 35% to 85% (no condensation)
Dimensions 192.65 mm x 111.15 mm, Panel width 20 mm (not including protrusions) Weight 232 g
Supported OS Windows 7/8 compatible with 32 bit / 64 bit each
Environmental compliance RoHS

■Front Panel

Front Panel

Top of page